12V & 240V Lampholders

socket
lampholder8054 12v E27 Batten Holder

12V & 240V Lampholders

We supply two types of low voltage lampholder for MR16 lamps. Both are provided with support bar and enclosure for the connection terminal block. Each differs in detail design according to individual preference.

Both types are reliable, high quality designs with no known field failures despite supplying over 1million to date.

lampholder

Teflon FEP insulated cable is a harder material than silicone rubber insulation and more tolerant of abuse. Silicone rubber insulation is more flexible and easier to work with but the softer material is more prone to damage.

Both silicone rubber and Teflon FEP are rated equally at 180°C for thermal performance.

lampholder

We supply a high quality BJB lampholder for 240V 50W Par 16 lamps with GZ10 / GU10 base. It is fully double insulated with a Steatite lampholder and double insulated Teflon FEP connection wires.

12V E27 Batten type Lampholder for 12V DC systems
The E27 Batten Holder for ceiling / wall installation is a very basic lampholder for 9W, 11W & 15W CFL 12V lamps with E27 cap for use on a 12V DC power supply as found in 12V solar lighting systems.

lampholder

240v Lampholder type GZ10/GU10 – screw type

Lamp Type : 12v 50w MR16 (GU5,3/GX5,3 base)

Lampholder : Steatite with screw terminals for lamp contacts

Terminal Block : 2-pole 6a (screw type)

Enclosure : screw shut cover with screw cable clamp

Support Plate : Zinc Plated Steel

Dimensions : 105L x 23W x 25H mm

L/H cable insulation : Teflon FEP (thermal rating 180c) 12cm long

240v Lampholder type GZ10/GU10 BJB 25.818 type

Lamp Type : 240v 50w PAR16 (GZ10/GU10 base)

Lampholder : Steatite with twist and turn lock for lamp

Electrical Protection : Double insulated class II (L/H cable is also class II – no sleeving req’d)

Enclosure : screw shut cover with screw cable clamp

Dimensions : 30L x 30W x 30H mm + wire length

L/H cable insulation : Teflon FEP (thermal rating 180c) 14cm long

12V E27 Batten type Lampholder for 12V DC systems

Ingress Protection: IP20

Lamp Holder: E27 /ES type

Operating Voltage: 12V DC

Centre Contact: +ve RED wire

Outer shell contact: -ve BLACK wire

Order Code 8693: 240v Lampholder type GZ10/GU10

Order Code 8054: E24 Batten type lampholder

Order Code 8053 : 12V DC E27 Lampholder